Manufacturer of industrial brushcutters
- DAH Line
- DAF Line
- DAF-250Ex
- DAF-225Ex
- DAF-225E
- DAF-180E
- DAF-180D
- DTN Line
- DAV Line
- Technology
- Previous Models
DAF group of horizontal-shaft, front-mounted brushcutter-chippers
DescriptionSpecificationsImage gallery |
Description
The DAF front-mounted brushcutter-chippers evolved from adapting the DAH series to vehicles such as wheeled or tracked skid steers or other dedicated units that are designed for use with front-mounted attachments. These industrial hydraulic attachments are ideal for intensive brushcutting applications including land clearing, development and maintenance of transmission line and pipeline right-of-ways, and roadside maintenance.
- DAF brushcutters use DENIS CIMAF’s patented horizontal-shaft rotor technology with fixed knives and bolt-on cutting blades, a design that offers numerous advantages:
- High efficiency unit that does not require additional power pack […];
- Highly productive operations, owing to optimal cutting angle […];
- Two, chevron-like rows of knives that direct the brushes towards the center of the rotor rather than to one of its extremities […];
- Blades that can be sharpened right on the unit […];
- Bolt-on blades that allow for fast replacement […];
- Thermally treated forged steel blades that deliver maximum resistance to impact and abrasion […];
- Knife holders that come with protective discs, thereby considerably reducing risk of breakage of welded parts on rotor tube […];
DAF models also have one or two variable displacement, axial-piston motors (to minimize overheating problems and improve re-acceleration […]) and a timing-belt drive system to eliminate slippage.
There are two versions of the DAF model: the double-drive industrial version and the single-drive unit. The double-drive version, which is currently not sold in Canada, the United States and the European Union, will be available in these markets by late May 2007. Don't delay. Contact us immediately to reserve a unit!
Specifications
Below are the main specifications for each of the front-mounted brushcutter-chippers. For detailed information, click on product name.
|
|
||||
| Cutting width: |
|
|
|
|
| (cm) |
254 |
222 |
189 |
189 |
| (pouces) |
93 |
83 |
83 |
72 |
| Weight, complete kit (estimated): |
|
|
|
|
| (kg) |
2430 |
1985 |
1365 |
1185 |
| (lb) |
5360 |
4380 |
3010 |
2610 |
| Required continuous flow: |
|
|
|
|
| (L/min) |
303 |
189 |
150 |
115 |
| (gal/min) |
80 |
50 |
40 |
30 |
| Operating pressure: |
|
|
|
|
| (bars) |
260 |
260 |
210 |
210 |
| (psi) |
3800 |
3800 |
3000 |
3000 |
| Number of blades on rotor: |
|
|
|
|
|
|
35 |
31 |
27 |
27 |
| Target material diameter: |
|
|
|
|
| (cm) |
60 |
40 |
25 |
20 |
| (pouces) |
24 |
15 |
10 |
8 |
- Notes :
- These specifications are for information purposes only and are subject to change without notice;