DAF-250Ex front-mounted brushcutter-chippers

Image gallery

Description

Features of the DAF-250Ex front-mounted horizontal-shaft brushcutter-chipper:: Widest cutting width among DENIS CIMAF brushcutters;; An ultra-robust industrial land clearing attachment with a double hydraulic drive;; Horizontal-shaft rotor with fixed knives and bolt-on cutting blades, allowing this unit to cut and chip dense material in a single pass;; Especially designed for wheeled or tracked carriers that are 200 hp and up, and accommodate front-mounted attachments;; Designed for intensive brushcutting applications (including land clearing, development and maintenance of transmission line and pipeline right-of-ways, and roadside maintenance).

Like other products in the DAF, product group, the DAF-240Ex uses DENIS CIMAF’s patented horizontal-shaft rotor technology, a technology with numerous advantages:: High efficiency unit that does not require additional power pack […];; Highly productive operations, owing to optimal cutting angle […];; Two, chevron-like rows of knives that direct the brushes towards the center of the rotor […];; Blades that can be sharpened right on the unit […];; Bolt-on blades that allow for fast replacement […];; Thermally treated forged steel blades that deliver maximum resistance to impact and abrasion […];; Knife holders that come with protective discs, thereby considerably reducing risk of breakage of welded parts on rotor tube […];

The DAF-250Ex also offers two variable displacement, axial-piston motors to minimize overheating problems and improve re-acceleration […]), each with a timing-belt drive to eliminate slippage.

Specifications

[version PDF]

	Specifications
Cutting width:
	254 cm	100 po
Cutting distance from ground level:
	1 cm	0.4 po
Exterior width:
	295 cm	116 po
Height, including pusher bar:
	139 cm	55 po
Height, without pusher bar:
	98 cm	38 po
Depth, including pusher bar:
	138 cm	55 po
Depth, without pusher bar:
	83 cm	55 po
Weight, typical (estimated):
	2430 kg	5360 lbs

	Hydraulic system
Variable displacement axial piston motor:
	•
Required continuous flow:
	303 L/min	80 gal/min
Operating pressure:
	260 bars	3800 psi
Rotating speed:
	2400 r/min
Rotating speed:
	No 20	1.25 po
Rotating speed:
	No 20	1.25 po
Rotating speed:
	No 16	1 po

	Features
Approximate carrier power:
	147 kW (200 hp) and up
Number of blades on rotor:
	35
Fixed knives:
	•
Bolted blades:
	•
Sharpenable blades:
	•
Thermically-treated, forged-steel blades:
	•
Low and easy maintenance:
	•
Heavy-duty construction:
	•
Simple to install:
	•
Target material diameter:
	60 cm	24 po

Notes:: These specifications are for information purposes only and are subject to change without notice.