Manufacturer of industrial brushcutters
DAH-125D brushcutter-chippers for excavators
DescriptionSpecificationsImage gallery |
 |
Description
- Features of the DAH-125D horizontal-shaft brushcutter-chipper:
- The wider version of the standard DAH brushcutter-chipper;
- An industrial land clearing attachment with a hydraulic drive;
- Horizontal-shaft rotor with fixed knives and bolt-on cutting blades, allowing this unit to cut and chip dense material in a single pass;
- Especially designed for 12- to 16-ton tracked excavators or other boom carriers with similar stability and hydraulic systems;
- Designed for intensive brushcutting applications (including land clearing, development and maintenance of transmission line and pipeline right-of-ways, and roadside maintenance).
- Like other products in the DAH product group, the DAH-125D uses DENIS CIMAF's patented horizontal-shaft rotor technology, a technology with numerous advantages:
- High efficiency unit that does not require additional power pack […];
- Highly productive operations, owing to optimal cutting angle […];
- Two, chevron-like rows of knives that direct the brushes towards the center of the rotor […];
- Blades that can be sharpened right on the unit […];
- Bolt-on blades that allow for fast replacement […];
- Thermally treated forged steel blades that deliver maximum resistance to impact and abrasion […];
- Knife holders that come with protective discs, thereby considerably reducing risk of breakage of welded parts on rotor tube […];
The DAH-125D also offers a variable displacement, axial-piston motor to minimize overheating problems and improve re-acceleration […] and a timing-belt drive to eliminate slippage.
Specifications
|
|
Specifications |
|
| Cutting width: |
|
|
|
|
121 cm |
48 in |
| Cutting distance from ground level: |
|
|
|
|
2 cm |
0.9 in |
| Exterior width: |
|
|
|
|
165 cm |
65 in |
| Height: |
|
|
|
|
90 cm |
35 po |
| Depth: |
|
|
|
|
69 cm |
27 in |
| Weight, typical (estimated): |
|
|
|
|
1005 kg |
2220 lb |
| Weight, with all options (estimated): |
|
|
|
|
1060 kg |
2330 lb |
|
|
Hydraulic System |
|
| Variable displacement axial piston motor |
||
|
|
• |
|
| Required continuous flow: |
|
|
|
|
115 L/min |
30 gal/min |
| Operating pressure: |
|
|
|
|
210 bars |
3000 psi |
| Rotating speed: |
|
|
|
|
3000 r/min |
|
| Pressure line: |
|
|
|
|
No 16 |
1 in |
| Return line: |
|
|
|
|
No 16 |
1 in |
| Drain line: |
|
|
|
|
No 8 |
0.5 in |
| Hydraulic panel lines (2): |
|
|
|
|
No 8 |
0.5 in |
|
|
Features |
|
| Excavator size: |
|
|
|
|
from 12 to 16 tonne |
from 26000 to 35000 lb |
| Approximate carrier power: |
|
|
|
|
|
59 kW (80 hp) and up |
| Number of blades on rotor: |
|
|
|
|
17 |
|
| Fixed knives: |
|
|
|
|
• |
|
| Bolted blades: |
|
|
|
|
• |
|
| Sharpenable blades: |
|
|
|
|
• | |
| Thermically-treated, forged-steel blades: |
|
|
|
|
• | |
| Low and easy maintenance: |
|
|
|
|
• | |
| Heavy-duty construction: |
|
|
|
|
• | |
| Simple to install: |
|
|
|
|
• | |
| Target material diameter: |
|
|
|
|
25 cm |
10 in |
- Notes :
- These specifications are for information purposes only and are subject to change without notice;
- The required hydraulic flow should be about 40% of the total hydraulic flow for a carrier without an additional power pack.