DAH-100E brushcutter-chippers for excavators

Description

Specifications

Image gallery

Description

Features of the DAH-100E horizontal-shaft brushcutter-chipper:: The narrower version of the industrial DAH brushcutter-chipper;; An ultra-robust industrial land clearing attachment with a hydraulic drive;; Horizontal-shaft rotor with fixed knives and bolt-on cutting blades, allowing this unit to cut and chip dense material in a single pass;; Especially designed for 18- to 20-ton wheeled excavators or other boom carriers with similar stability and hydraulic systems;; Designed for intensive brushcutting applications (including land clearing, development and maintenance of transmission line and pipeline right-of-ways, and roadside maintenance).

Like other products in the DAH product group, the DAH-100E uses DENIS CIMAF's patented horizontal-shaft rotor technology, a technology with numerous advantages:: High efficiency unit that does not require additional power pack […];; Highly productive operations, owing to optimal cutting angle […];; Two, chevron-like rows of knives that direct the brushes towards the center of the rotor […];; Blades that can be sharpened right on the unit […];; Bolt-on blades that allow for fast replacement […];; Thermally treated forged steel blades that deliver maximum resistance to impact and abrasion […];; Knife holders that come with protective discs, thereby considerably reducing risk of breakage of welded parts on rotor tube […];

The DAH-100E model also offers a variable displacement, axial-piston motor to minimize overheating problems and improve re-acceleration […] and a timing-belt drive to eliminate slippage.

Specifications

[version PDF]

	Specifications
Cutting width:
	109 cm	43 in
Cutting distance from ground level:
	2 cm	1 in
Exterior width:
	160 cm	63 in
Height:
	104 cm	41 in
Depth:
	74 cm	29 in
Weight, typical (estimated):
	1260 kg	2780 lb
Weight, with all options (estimated):
	1315 kg	2890 lb

	Hydraulic System
Variable displacement axial piston motor
	•
Required continuous flow:
	150 L/min	40 gal/min
Operating pressure:
	260 bars	3800 psi
Rotating speed:
	3000 r/min
Pressure line:
	No 16	1 in
Return line:
	No 20	1.25 in
Drain line:
	No 12	0.75 in
Hydraulic panel lines (2):
	No 8	0.5 in

	Features
Excavator size:
	from 18 to 20 tonne	from 40000 to 44000 lb
Approximate carrier power:
		74 kW (100 hp) and up
Number of blades on rotor:
	15
Fixed knives:
	•
Bolted blades:
	•
Sharpenable blades:
	•
Thermically-treated, forged-steel blades:
	•
Low and easy maintenance:
	•
Heavy-duty construction:
	•
Simple to install:
	•
Target material diameter:
	40 cm	15 in

Notes:: These specifications are for information purposes only and are subject to change without notice;; The required hydraulic flow should be about 40% of the total hydraulic flow for a carrier without an additional power pack.