Manufacturer of industrial brushcutters
DAH-050 brushcutter-chippers for excavators
DescriptionSpecificationsImage gallery |
 |
Description
- Features of the DAH-050 horizontal-shaft brushcutter-chipper:
- The narrower version of the standard DAH brushcutter-chipper
- An industrial land clearing attachment with a hydraulic drive;
- Horizontal-shaft rotor with fixed knives and bolt-on cutting blades, allowing this unit to cut and chip dense material in a single pass;
- Especially designed for 7- to 12-ton tracked excavators, backhoes or other boom carriers with similar stability and hydraulic systems;
- Designed for intensive brushcutting applications (including land clearing, development and maintenance of transmission line and pipeline right-of-ways, and roadside maintenance).
- Like other products in the DAH product group, the DAH-050 uses DENIS CIMAF’s patented horizontal-shaft rotor technology, a technology with numerous advantages:
- High efficiency unit that does not require additional power pack […];
- Highly productive operations, owing to optimal cutting angle […];
- Two, chevron-like rows of knives that direct the brushes towards the center of the rotor […];
- Blades that can be sharpened right on the unit […];
- Bolt-on blades that allow for fast replacement […];
- Thermally treated forged steel blades that deliver maximum resistance to impact and abrasion […];
- Knife holders that come with protective discs, thereby considerably reducing risk of breakage of welded parts on rotor tube […];
The DAH-050 also offers a variable displacement, axial-piston motor to minimize overheating problems and improve re-acceleration […] and a timing-belt drive to eliminate slippage.
Specifications
|
|
Specifications |
|
| Cutting width: |
|
|
|
|
103 cm |
41 in |
| Cutting distance from ground level: |
|
|
|
|
5 cm |
2.1 in |
| Exterior width: |
|
|
|
|
131 cm |
52 in |
| Height: |
|
|
|
|
79 cm |
31 in |
| Depth: |
|
|
|
|
81 cm |
32 in |
| Weight, typical (estimated): |
|
|
|
|
720 kg |
1580 lb |
| Weight, with all options (estimated): |
|
|
|
|
755 kg |
1670 lb |
|
|
Hydraulic System |
|
| Variable displacement axial piston motor |
||
|
|
• |
|
| Required continuous flow: |
|
|
|
|
90 L/min |
24 gal/min |
| Operating pressure: |
|
|
|
|
210 bars |
3000 psi |
| Rotating speed: |
|
|
|
|
2400 r/min |
|
| Pressure line: |
|
|
|
|
No 12 |
0.75 in |
| Return line: |
|
|
|
|
No 12 |
0.75 in |
| Drain line: |
|
|
|
|
No 8 |
0.5 in |
| Hydraulic panel lines (2): |
|
|
|
|
No 6 |
0.375 in |
|
|
Features |
|
| Excavator size: |
|
|
|
|
from 8 to 10 tonne |
from 18000 to 22000 lb |
| Approximate carrier power: |
|
|
|
|
|
48 kW (65 hp) and up |
| Number of blades on rotor: |
|
|
|
|
13 |
|
| Fixed knives: |
|
|
|
|
• |
|
| Bolted blades: |
|
|
|
|
• |
|
| Sharpenable blades: |
|
|
|
|
• | |
| Thermically-treated, forged-steel blades: |
|
|
|
|
• | |
| Low and easy maintenance: |
|
|
|
|
• | |
| Heavy-duty construction: |
|
|
|
|
• | |
| Simple to install: |
|
|
|
|
• | |
| Target material diameter: |
|
|
|
|
15 cm |
6 in |
- Note :
- These specifications are for information purposes only and are subject to change without notice;